Dr. Warm heated battery powered heated jacket with shock absorption for indoor use

Getting Started

Always remove the battery from your hat when charging

Charge your battery at room temperature for three hours prior to first use

The LED light on the charger will illuminate RED while charging.

The LED light one the charger will illuminate GREEN when Charging is complete

carefully connect the power wire inside the hat storage pocket to the battery

Position the battery inside the hat pocket and seal velcro along the top to secure the battery in place.

When battery is installed the hat will automatically heat to the lowest temperature setting(1 light bar will illuminate)

Press ON/OFF button a second time to increase the heat setting to Medium(2 light bars will illuminate)

Press ON/OFF button a third time to increase the heat setting to High(3 light bars will illuminate)

Press ON/OFF button of fourth time to turn hat heat system off(all light bars will shut off)

Wash and Care

Remove battery from hat when being cleaned and stored

Do not machine wash

Do not machine dry

Do not bleach

Do not iron

Do not dry clean

Spot clean hat by hand using only mild detergent

Air dry hat lying flat

Heel cushion design;

Shock absorption when walking and runing;

Arch support design, suit your foot shape;